Power Saving Utility Manual

By using the Power Saving Utility, you can easily switch your PC to power saving mode. The power saving mode reduces power consumption, thereby extending battery life.

• You can switch between power saving mode and normal mode by using the Power Saving Button.Go to instructions
• You can switch between power saving mode and normal mode using the icon in the notification area at the bottom-right corner of the screen. Go to instructions
• You can switch between power saving mode and normal mode from Start menu. Go to instructions
• You can change the device condition by using the icon in the notification area at the bottom-right corner of the screen.Go to instructions
• You can confirm the present device condition by using the icon in the notification area at the bottom-right corner of the screen.Go to instructions
• You can set up the actions for each device under power saving mode.Go to instructions

In this window, you set up the brightness of the display or power consumption level of each device under power saving mode. You also can set up whether or not to display a message on screen when you switch modes or when you start up under power saving mode. When a device does not work properly, you can initialize the device from this window.

1. Right-click the Power Saving Utility icon ( or ) in the notification area at the bottom-right of the screen, and select "Power saving mode settings". The [Power Saving Utility Setting] window appears.

2. Set up the desired action for each device while the system is in power saving mode.

1. Click the [Action under power saving mode] cell for the device you want to set up.

2. Click  to the right of the selected cell, and then select what you want the device to do while the system is in power saving mode.

3. Use the check boxes at the bottom of the window to indicate whether or not you want a message to be displayed onscreen when you switch modes or when you start up under power saving mode.

1. "Display a message when system starts up in power saving mode."

2. "Display a confirmation message when switching modes."

3. "Display a message when mode switching has failed."

If you click  into , information for a device is displayed when switching of modes has failed.

4. "The ECO indicator turns on when battery consumption is low."

If you click  into , the ECO indicator turns on when battery consumption is low. This function is effective only on products what have the ECO indicator.

4. Click on the [OK] button.

Take the following actions in case a device does not work properly after switching back to normal mode: Click [Initializing device condition] button. A window for switching confirmation appears. Click [OK] button. Each device is initialized; power saving mode is cancelled and the disabled device is enabled. Power Saving Utility icon in notification area at bottom-right of the screen turns into (Normal Mode). [Power Saving Utility Setup] window is closed.

You can switch between power saving mode and normal mode using one of the following three methods:

• Switch with the Instant / Power Saving button (certain models only):Go to instructions
• Switch using the icon in notification area at the bottom-right of the screen.Go to instructions
• Switch from Start menu.Go to instructions

If a device is in use, switching of modes must be done after using the device; otherwise the device may not shut down properly.

Switching with Instant / Power Saving Button

1. Press the Instant / Power Saving button (certain models only).

If you have selected to "Display a confirmation message when switching modes" in accordance with "Setting up the power saving mode actions", the following confirmation message is displayed.

If you unchecked "Display a confirmation message when switching modes" in the Power Saving Utility window, or you checked "Do not display this message again" in this window, the window will not appear unless you check the box in the Power Saving Utility window again.

2. Click the [OK] button.

• When switching from power saving mode to normal mode:  ->
• When switching from normal mode to power saving mode:  ->

Switching with the icon in the notification area at bottom-right of the screen

1. Right-click the icon (/) in the notification area at the bottom-right of the screen.

2. Select "Switching power saving mode" in the displayed menu.

If you uncheck "Display a confirmation message when switching modes" in Power Saving Utility window, or you check "Do not display this message again" in this window, the window will not appear unless you check the box in Power Saving Utility window again.

4. Click the [OK] button.

• When switching from power saving mode to normal mode:  ->
• When switching from normal mode to power saving mode:  ->

Switching with the start menu

1. Press [Start] button and select [All Programs]->[Power Saving Utility]->[Switching power saving mode].

If you unchecked "Display a confirmation message when switching modes" in the Power Saving Utility window, or you checked the "Do not display this message again" in this window, the window will not appear unless you check the box in the Power Saving Utility window again.

3. Click the [OK] button.

• When switching from power saving mode to normal mode:  ->
• When switching from normal mode to power saving mode:  ->

If switching fails

If you have selected to "Display a message when mode switching has failed" in accordance with"Setting up the power saving mode actions", the following confirmation message is displayed. When the message is displayed, you can verify the information of the device that failed.

After confirming the contents, click [OK].

If you unchecked "Display a message when mode switching has failed" in the Power Saving Utility window, or you checked the "Do not display this message again" in this window, the window will not appear unless you check the box in the Power saving Utility window again.

When mode switching is done while a device (e.g., S-Multi drive, CD/DVD drive) is in use, the following message may appear on the screen:

When that happens, click the [OK] button.

Switch the condition of each device from the icon in the notification area at bottom-right of the screen.

If a device is in use, switching of modes must be done after using the device. Otherwise the device may not shut down.

 

1. Right-click the icon(/) in nNotification area at bottom-right on the screen.

2. Select the device that you want to switch from the displayed menu, and choose the condition that you want to set for the device.

3. If you have selected to "Display a confirmation message when switching modes" in accordance with"Setting up the power saving mode actions", the following confirmation message is displayed.

If you unchecked "Display a confirmation message when switching modes" in the Power Saving Utility window, or you checked the "Do not display this message again" in this window, the window will not appear unless you check the box in the Power saving Utility window again.

4. Click the [OK] button.

A progress indicator appears while switching modes.

When the device condition is switched, the icon in notification area at bottom-right of the screen will change:

• When switching all device conditions to normal mode:  ->
• When switching one or more device conditions to power saving mode:  ->

·    Note that when switching certain devices from power saving to normal mode, the icon in the notification area may not change to the normal icon. If that should occur, please return to the normal mode as directed in "Switching between Power Saving Mode and Normal Mode".

If switching fails

If you have selected to "Display a message when mode switching has failed" in accordance with "Setting up the power saving mode actions", the following confirmation message is displayed. When the message is displayed, you can verify the information about the device that failed.

After confirming the contents, click [OK].

 

If you unchecked "Display a message when mode switching has failed" in the Power Saving Utility window, or you checked the "Do not display this message again" in this window, the window will not appear unless you check the box in the Power saving Utility window again.

When mode switching is attempted while a device (e.g., S-Multi drive, CD/DVD drive) is in use, the following message may appear on the screen:

When that happens, click the [OK] button.

Confirm the condition of each device using the icon in the notification area at the bottom-right of the screen. You can also switch the device condition using this method.

If a device is in use, finish using it before switching modes for it, otherwise it may not shut down.

 

1. Right-click the icon( or ) in the notification area at the bottom-right on the screen.

2. Select "Display the present device condition" in the displayed menu. The current device conditions are displayed.

3. If you simply want to see the device conditions without changing them, click [Cancel] when you are done. The window closes.
4. If you want to change the device condition(s), perform the following procedure:
   
   Set up the device condition for each device.

1. Click the [Device condition] cell for the device(s) you want to change.

 

2. Click  and select the condition you want to change it to.

5. Click the [OK] button.
6. If you have selected to "Display a confirmation message when switching modes" in accordance with "Setting up the power saving mode actions", the following confirmation message is displayed.

If you unchecked "Display a confirmation message when switching modes" in the Power Saving Utility window, or you checked the "Do not display this message again" in this window, the window will not appear unless you check the box in the Power Saving Utility window again.

7. Click the [OK] button.

A progress indicator appears while switching modes.

When the device condition is switched, the icon in the notification area at bottom-right on the screen is changed:

• When switching all device conditions to normal mode:  ->
• When switching one or more device conditions to power saving mode:  ->

·    Note that when switching certain devices from power saving to normal mode, the icon in the notification area may not change to the normal icon. If that should occur, please return to the normal mode as directed in "Switching between Power Saving Mode and Normal Mode".

If switching fails

If you have selected to "Display a message when mode switching has failed" in accordance with "Setting up the power saving mode actions", the following confirmation message is displayed. When the message is displayed, you can verify the information of the device that failed.

After confirming the contents, click [OK].

If you unchecked "Display a message when mode switching has failed" in the Power Saving Utility window, or you checked the "Do not display this message again" in this window, the window will not appear unless you check the box in the Power saving Utility window again.

When mode switching is attempted while a device (e.g., S-Multi drive, CD/DVD drive) is in use, the following message may appear on the screen:

When that happens, click the [OK] button.

If you shut down the PC while in power saving mode, it will start up under power saving mode and a limitation window displaying the state of each device is displayed.

After confirming the contents, click [OK].

If you unchecked "Display a message when system starts up in power saving mode" in the Power Saving Utility window, or you checked the "Do not display this message again" in this window, the window will not appear unless you check the box in the Power saving Utility window again.

Icon	Description
	PC is set in power saving mode.
	PC is set in normal mode.

• Even though the PC may be used under multiple user accounts, the power saving mode has only one setting per PC. Therefore, if another user logs on to the PC with another user account while under power saving mode, the PC will retain the current power saving mode.
• Mode switching can be performed only in accordance with the methods instructed in this manual. Changing the PC's state to Standby/Resume/Hibernation or Reboot/Logoff will not automatically change the present mode.
• If the hardware condition is changed intentionally after or during mode switching, this software does not reset the hardware settings.

Microsoft, Windows, and Windows Vista are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
Power Saving Utility is a product name of Fujitsu Limited.
All other company names or products names mentioned herein are trademarks or registered trademarks of the respective companies.

All Rights Reserved, Copyright© FUJITSU LIMITED 2005-2012